Time Change Instructions
The instructions for changing the time on your particular phone system are listed below. Select the system name to see the instructions.
- NEC Elite IPK II
- NEC SV8100
- NEC Elite IPK
- NEC Elite 192
- NEC Elite 48
- NEC Professional Level II
- NEC Professional Level I
- NEC Professional 120
- NEC Electra 824
- Comdial FX
- Comdial DSU
- Comdial DX-80
If you are not sure about your system model or your system is not listed either email us at service@askbts.com or call the BTS Service Department at (205) 290-8301 and the BTS help desk will assist you with determining your system or assisting you remotely with your time change (service fees may apply).
Note: Change the clock from the attendant's station – usually extension 10, 100, or the first extension in the extension number range (i.e., 200 for 200 to 299 range, etc.) – with handset resting on the cradle and the phone not in use.
NEC Elite IPK II / NEC SV8100
- Press SPEAKER button
- Dial 728
- Dial two digits for the hour (24 hour clock, 13 = 1:00 PM)
- Dial two digits for the minutes (00 thru 59)
- Press SPEAKER to exit
NEC IPK / NEC ELITE 192 / NEC ELITE 48
The instructions for changing the time are the same for these systems.
- Press FEATURE button
- Dial 9 #
- Enter the hour and minute by using the dial pad
- Press RECALL button to change AM / PM setting
- Press HOLD button to change to calendar settings or Press FEATURE button to exit
- Press RECALL to select day of week
- Press # to move the cursor to day of month field
- Enter day of month by using dial pad
- Press RECALL button to select month
- Press # to move the cursor to the year field
- Enter last two digits of year by using dial pad.
- Press FEATURE to exit
PROFESSIONAL LEVEL I / LEVEL II / 120
- Press FNC button
- Dial 9 #
- Enter the hour and minute by using the dial pad
- Press RECALL button to change AM / PM setting
- Press HOLD button to change to calendar settings or Press FNC button to exit
- Press RECALL to select day of week
- Press # to move the cursor to day of month field
- Enter day of month by using dial pad
- Press RECALL button to select month
- Press # to move the cursor to the year field
- Enter last two digits of year by using dial pad.
- Press FNC to exit
NEC Electra 824
- Press FNC button
- Dial 9
- Dial #
Note: Use # and * to move cursor to desired item to change - Enter the hour and minute by using the dial pad
- Press RECALL button to change AM / PM setting
- Press HOLD button to change to calendar settings
Comdial FX
- Press INTERCOM
- Dial * # 0 * 0 1
- Dial two digits (01 - 12) for month
- Dial two digits (01 - 31) for day
- Dial two digits (00 - 99) for year
- Dial two digits (00 - 23) for hour
Example: 8:15 PM = 2015 (enter 2 0 for hours) - Dial two digits (00 - 59) for minutes
Example: 8:15 PM = 2015 (enter 1 5 for minutes) - Dial # to save
- Press SPEAKER to end
Comdial DSU
- Press INTERCOM
- Dial * # 0 1
- Dial two digits (00 - 99) for year
- Dial two digits (01 - 12) for month
- Dial two digits (01 - 31) for day
- Dial two digits (00 - 23) for hour
- Dial two digits (00 - 59) for minutes
- Press SPEAKER to end
Comdial DX-80
Note: BACK, NEXT, SHOW, CHG, BKSP, and SAVE refer to the three buttons below the LCD display.
- Enter Database Administration by pressing the FEATURE, #, ✱ buttons
- Dial ######## (admin password)
- Press SHOW
- Dial 0814
- Press SAVE
- Press SHOW
- Press NEXT until hour is displayed
- Press CHG
- Dial 2 digits for hour based on 24-hour clock
- Press SAVE
- If you are done lift and replace handset to reset phone, or press CHG to set minutes
- Dial 2 digits for minutes
- Press SAVE
- Lift and replace handset